RUBBER LINED VALVE

RUBBER LINED VALVE

"Flow-Tek" Diaphragm Valves have been developed to satisfy market demand for a valve to handle sludge, slurries and give high flow performance with minimum turbulence, while giving 100% leak tight closure.

A wide choice of materials, methods of operation and body connections meet the needs of most industrial applications. Extended life, reliability, safety and ease of use, combined with essentially simple design, result in low maintenance for minimum running costs. "Flow-Tek" straight through bore Diaphragm Valves (DN 15 To DN 350) positively benefit your company with a unique range of features.
All the valves are manufacturing as per international Design and standards to get the Total Interchangeable, Finest Quality and Workmanship.

CHOICE OF DIAPHRAGMS:

Diaphragm life depends not only upon the nature of the fluid handled but also upon the temperature, pressure and frequency of operations.

DIAPHRAGM MATERIALS AND CONFIGRATIONS    
GRADEMATERIALTEMP OC TYPICAL SERVICES
  MIN.MAX. 
     
ANatural Rubber-3080Water, Gases, Sewage, Slurry Sludge, Brine, Acids, Alkalis,
     
WAWhite Natural Rubber-1080Pigments Pharmaceuticals
     
NNeoprene-2595Weak Chemicals, Hot Compressed Air, Acids, Alkalis, Oils
     
EEthylene Propylene-30150Chemicals, Acids, Abrasives
     
BBlack Butyl-25120Chemicals, Gases, Strong Acids, Chlorine
     
WBWhite Butyl-25105Foods, Beverages
     
HHypalon-15105Oxidizing Agents, Concentrated Sulphuric Acid, Phosphoric Acid, Chlorine
     
RBuna - N-1080Animal, Vegetable and Mineral Oils, Paraffin, Kerosene
     
SSoft Natural Rubber-1580Abrasive Fluids
     
VViton-25165Hydro Carbons, Strong Acids, Solvents, Chlorine
     
EPEPDM-20110Radio Active Fluid, Chemical resistance similar to 'BG'
     
TPTFE (With Neoprene)-30175All Chemicals and Foods
    
DESIGN DESCRIPTION;
DESIGN STD.: BS 5156
DIAPHRAGM VALVES: ANSI B 16.34
FACE TO FACE: ANSI B 16.10
END DRILLED: ANSI B 16.5
BUTT WELD ENDS: ANSI B 16.25
INSPECTION AND TEST: BS 5156

OTHER MFG. RANGE:

Pressure Reducing Valve, Safety Valve, Globe Valve, Gate Valve, Butterfly Valve, Ball Valve, Non Return Valve, Automatic Control Valve, Pneumatic Control Valve, Motorised Control Valve, Knife Edge Gate Valve, Flush Bottom Valve, Strainer, Filter, Pressure Reducing Station, Gas Skid & All type of manual / actuator / cylinder operated valves with any type of automation.

Product Range